Self-shielded flux-cored wire ESAB Coreshield 8

Self-shielded Flux-Cored Wire ESAB Coreshield 8 11.3 kg Spool

• Self-shielded flux-cored wire Coreshield 8
• All-position suitability for welding structural and fine-grain structural steels
• Can be welded with conventional MAG power sources
• Shielding gases: not required
• Welding current -DC
• Approvals: TÜV, DB, CE
  
• ESAB Part No. 14C816710V

Description

Self-shielded flux-cored wire with all-position suitability for welding structural and fine-grain structural steels, approved up to a yield strength of 355 N/mm². Good low-temperature toughness down to -20 °C. Can be welded with conventional MAG power sources. Due to increased welding fume generation, Coreshield 8 should only be used outdoors, on construction sites, or with direct torch extraction. Shielding gases: not required For materials such as P235 / S235 - P420 / S420 and similar.

Standard Designations

Classifications SFA/AWS A5.20 : E71T-8

EN ISO 17632-A : T 42 2 Y N 2

Approvals ABS : 3YSA H10 BV : SA3YM H10 CE : EN 13479 CWB : E491T-8-H16 DB : 42.039.35 DNV : III YMS H10 GL : 3YS LR : 3YS H10 NAKS/HAKC : 1.6MM VdTÜV : 10019

Welding current -DC

 

Typical Mechanical Properties of ESAB Coreshield 8

Condition	Yield Strength	Tensile Strength	Elongation
AWS CO2 (C1)
As Welded	457 MPa	552 MPa	26%

 

 

Materials for ESAB Coreshield 8

P235 / S235 - P420 / S420 and similar

 

Storage / Re-drying

• Store dry
• Re-drying generally not necessary