ESAB Rogue EM 180 Welding Machine with Torch and Accessories

ESAB Rogue EM 180 Welding Machine with Torch and Accessories

Scope of delivery:

• ESAB Rogue EM 180 welding machine Item number: 0700301091
• MXL 201 3 m MAG torch
• 3 m power cable with 230 V 16 A plug
• 3 m ground cable
• 4.5 m gas hose with quick coupling
• 1 kg ESAB OK AristoRod 12.50 0.8 mm welding wire
• 1 kg ESAB GoldRox Rutile electrodes 2.5 x 350 mm
• Feed rollers

The ESAB Rogue EM 180 is an inverter-based welding machine designed for all your welding projects, from metal fabrication to repair and maintenance. The device features industrial-grade welding results and comprehensive adjustment options that allow the welder to adapt the arc characteristics to the material being welded.

Weighing only 16.2 kg, with a single-phase 230 V mains connection, this device offers maximum flexibility.

Technical data:

• Supply voltage: 230 VAC ±10 %, 1-phase, 50/60 Hz
• Power saving mode: 50 W
• Rated current for MIG/MAG welding:
  • 180 A / 23 V at 30 %
  • 116 A / 19.8 V at 60 %
  • 90 A / 18.5 V at 100 %
• Rated current for MMA welding:
  • 150 A / 26 V at 30 %
  • 97 A / 23.9 V at 60 %
  • 75 A / 20 V at 100 %
• Power range: 30–180 A
• Voltage range: 12-26 V
• Wire diameter for low-alloy steel and stainless steel flux-cored wire and aluminum: 0.6–1.0 mm
• Wire feed speed: 2.0–16.5 m/min
• Max. spool diameter: 100 mm, 200 mm
• Open-circuit voltage: 78 VDC
• Efficiency at maximum current: > 82 %
• Power factor at maximum current: 0.8
• Operating temperature: From -10 to +40°C
• Protection class: IP23S
• Dimensions: Length x Width x Height including top handle 590 x 220 x 385 mm
• Weight: 16.2 kg

Features:

• Large 14-segment display – instant feedback on voltage and wire feed speed for clear display
• Synergic welding programs – full range of welding parameters, sheet thicknesses 0.5–8.0 mm
• Power Factor Correction (PFC) – for a stable arc that is insensitive to current fluctuations even with extension cables up to 100 m
• Unique, robust industrial design – supports multiple lifting points and cable management
• Arc dynamics – fine-tuning of arc characteristics
• Suitable for welding self-shielded flux-cored wires and stick electrodes, as well as for GMA brazing.
• Protection class IP23S for indoor and outdoor use

Next level technology:

• Easy setup for beginners and continuous monitoring for experienced welders.
• IP23S protection for use indoors or on construction sites.

Overheat protection:

• Automatic shutdown of the welding circuit if it overheats.
• Automatic restart after cooling.

Duty cycle:

• Based on a 10-minute period.
• 30% duty cycle means 3 minutes of welding and 7 minutes of pause.
• 100% duty cycle means continuous welding without interruption.

MMA:

• Welding with stick electrodes.

Synergy:

• Automatic adjustment of welding parameters based on the selected material and sheet thickness of the workpiece.

Euro central connection:

• Standard connection for various types of welding torches.

Brazing with CuSi:

• Joining galvanized sheets in the automotive sector

MIG/MAG:

• Arc welding under shielding gas

Polarity change - welding without gas:

• Possibility of welding with flux-cored wire without shielding gas.